تفاصيل المنتج:
شروط الدفع والشحن:
|
| Product Name: | Electric Galvanized steel Pole | Application: | Distribution Line |
|---|---|---|---|
| Material: | SteelQ235,Q345 | Minimum yield strength: | 355 mpa |
| Max ultimate tensile strength: | 620 mpa | Wall thickness: | 1mm-36mm |
| تسليط الضوء: | electric utility poles,steel utility poles,steel utility poles |
||
Outdoor Tapered 110 KV Transmission Line Steel Power Pole with Channel Steel Cross Arm
Steel
The material is in accordance with NF EN 10025
Standard and NF EN 10149 Standard,it has the following property.
-Yield Strength=355N/mm2
-Toughness remains the same under 20 degrees below zero.
-Galvanization is in accordance with NFA35503 Standard Class 1.
Specification:
| Suit for | Electricity distribution |
| Shape | Conoid ,Multi-pyramidal,Columniform,polygonal or conical |
| Material | Usually Q345B/A572,minimum yield strength>=345n/mm2 Q235B/A36,minimum yield strength>=235n/mm2 As well as Hot rolled coil from Q460 ,ASTM573 GR65, GR50 ,SS400, SS490, to ST52- |
| Torlance of the dimenstion | +- 2% |
| Power | 10 KV ~550 KV |
| Safety Factor | Safety factor for conducting wine : 8 Safety factor for grounding wine : 8 |
| Design Load in Kg | 300~ 1000 Kg appliced to 50cm from the to pole |
| Marks | Nane palte through rivert or glue ,engrave ,emboss as per customer requirement |
| Surface treatment | Hot dip galvanized Following ASTM A 123, color polyester power or any other standard by client required |
| Joint of Poles | Insert mode,innerflange mode,face to face joint mode |
| Design of pole | Against earthquake of 8 grade |
| Wind Speed | 160 Km/Hour . 30 m /s |
| Minimum yield strength | 355 mpa |
| Minimum ultimate tensile strength | 490 mpa |
| Max ultimate tensile strength | 620 mpa |
| Standard | ISO 9001 |
| Length of per section | Within 14m once forming without slip joint |
| Welding | We has past flaw testing.Internal and external double welding makes the welding beautiful in shape Welding Standard :AWS ( American Welding Society ) D 1.1 |
| Thickness | 1 mm to 30 mm |
| Production Process | Rew material test → Cuttingj →Molding or bending → Welidng (longitudinal )→Dimension verify →Flange welding →Hole drilling →Calibration → Deburr→Galvanization or powder coating ,painting →Recalibration →Thread →Packages |
| Packages | Our poles as normal cover by Mat or straw bale at the top and bottom , anyway also can following by client required , each 40HC or OT can loading how many pcs will calculation base on the client actually specification and data |
Welding
We have past flaw testing. Internal and external double welding makes the welding beautiful in shape
Welding Standard :AWS ( American Welding Society ) D 1.1
Galvanization
Standard:NFA91121/ASTM A123
Average thickness of the galvanization:Not less than 86μm.
Installation
-Remove all the equipment on the pole during Assembly.
-Circle a sling around th epole shaft of each section.
-Fix the sling on top section to one pulley block.
-The sling on the bottom section is tightly fixed and fixed at the center of gravity.
-Make the steel pole vertical by tighten the sling of the top section.
-Fix the steel pole.
-Remove the sling.
Quality Control
We strictly follow the standard of ISO9001-2008. Quality is in the first place at every stage of production to ensure the product compliance to the specification/standards. Careful inspections are carried out by highly trained inspection engineers during every procedure from raw material stage to finished product and delivery.
Professional Direct Buried Q345 15m Metal Utility Poles Octagonal Cross Section Shape
تراجع الساخنة الجلفنة القطب الطاقة الكهربائية لأكثر من مشروع العنوان
Conical 3.5mm thickness electric power pole 22m height with three sections for transmission
3mm Thickness NGCP Electrical Power Pole For Electricity Distribution
Transmission Line Project Electrical Power Pole 18m 10KN For Electricity Distribution
Power Line 11m 8KN Electrical Power Pole With Galvanizing Surface Treatment
Anticorrosive 14m 500Dan Steel Power Pole For Power Transmission Electric Line
Electricity Distribution 12m Tubular Steel Power Pole For Transmission Line Project
11.8m Height Spray Paint Galvanised Steel Poles For Transmission Equipment
12m Gr 65 Material Galvanized Steel Pole Round Electric Transmission Line Poles
12m S355 S500 Steel Power Pole ASTM A123 Galvanized For Street Lighting
Multi Sided Single Circuit Galvanized Steel Pole For Electrical Line 132kv
