| Type | straight pole, tensile pole, turn pole |
|---|---|
| Suit for | electricity distribution |
| Shape | conoid, multi-pyramidal, columniform, polygonal or conical |
| Welding standard | AWS D1.1 |
| tolerance | +/-2% |
| Type | straight pole, tensile pole, turn pole |
|---|---|
| Suit for | electricity distribution |
| Shape | conoid, multi-pyramidal, columniform, polygonal or conical |
| Welding standard | AWS D1.1 |
| tolerance | +/-2% |
| Type | straight pole, tensile pole, turn pole |
|---|---|
| Suit for | electricity distribution |
| Shape | conoid, multi-pyramidal, columniform, polygonal or conical |
| Welding standard | AWS D1.1 |
| tolerance | +/-2% |
| Type | straight pole, tensile pole, turn pole |
|---|---|
| Suit for | electricity distribution |
| Shape | conoid, multi-pyramidal, columniform, polygonal or conical |
| Welding standard | AWS D1.1 |
| tolerance | +/-2% |
| Type | straight pole, tensile pole, turn pole |
|---|---|
| Suit for | electricity distribution |
| Shape | conoid, multi-pyramidal, columniform, polygonal or conical |
| Welding standard | AWS D1.1 |
| tolerance | +/-2% |
| Type | straight pole, tensile pole, turn pole |
|---|---|
| Suit for | electricity distribution |
| Shape | conoid, multi-pyramidal, columniform, polygonal or conical |
| Welding standard | AWS D1.1 |
| tolerance | +/-2% |
| نوع | القطب المستقيم ، القطب الشد ، بدوره القطب |
|---|---|
| دعوى ل | توزيع الكهرباء |
| شكل | مخروطي ، متعدد الأهرامات ، عمودي الشكل ، متعدد الأضلاع أو مخروطي |
| معيار اللحام | AWS D1.1 |
| تسامح | +/- 2٪ |
| اكتب | القطب المستقيم ، القطب الشد ، بدوره القطب |
|---|---|
| دعوى ل | توزيع الكهرباء |
| شكل | conoid ، متعدد هرمي ، عمودي ، مضلع أو مخروطي |
| لحام عادي | AWS D1.1 |
| التسامح | +/- 2٪ |
| ارتفاع | من 6 م إلى 15 م |
|---|---|
| قلم المدقة | انحدار حارّ يغلفن |
| اساسي | ISO9001 |
| لحام عادي | AWS D1.1 |
| تفاوت | +/- 2٪ |
| Power | 10kv~550kv |
|---|---|
| Type | straight pole, tensile pole, turn pole |
| Thickness | 1mm to 30mm |
| Wind speed | 160km/h, 30m/s |
| tolerance | +/-2% |
